ErGear Dual Monitor Stand up to 33 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75×75 100x100mm
Original price was: $59.99.$39.98Current price is: $39.98.
Price: $59.99 - $39.98
(as of Mar 22, 2026 11:46:24 UTC – Details)
From the brand
New Release
Ergear Standing Desk
ErGear Dual Monitor Mount
Ergear Single Monitor Mount
Ergear Multi Monitor Mount
Computer Compatibility – To ensure compatibility of the dual monitor stand, each of your monitors must meet three conditions: Firstly, computer screen size range: 17 to 33 inches. Secondly, screen weight range: 4.4 to 22 lbs. Thirdly, there must be VESA mounting holes on the back of the monitor screen that are spaced 75×75 mm or 100×100 mm apart. Please make sure that your monitor meets all of the above conditions before purchasing.
Maximum Flexibility – The monitor stand features +/-90° left and right swivel for multi-screen co-driving, +90° to -35° up and down tilt for your office comfort, and 360° swivel for landscape and portrait modes.
Height & Extension Adjustment – The dual monitor arm for 2 monitors can be positioned as high as 17.5″ above the desk surface, allowing you to raise your screens closer to eye level for more comfort. The flexible arms can extend the screens 17.5″ closer to you for a more immersive viewing experience.
Easy to install – The structured monitor stand is very easy to install, you can choose C-clamp or grommet hole as needed. For the sake of using experience, please check if your table meets the following three conditions: Material first, we only recommend wooden table. Table form secondly, The bottom of the table should preferably be free of any beams or panels that may interfere with installation. Table thickness thirdly,’C’ clamp fits 0.39″-2.56″ while grommet mount fits 0.39″-2.17″.
Advanced Gas Spring Technology -Tested for 20,000 cycles, our dual monitor arm holds the screen securely in place while allowing for smooth, easy adjustments. Additionally, the long service life of the gas springs will enhance your experience.
11 reviews for ErGear Dual Monitor Stand up to 33 inches Screen, Load-Bearing Max 22 lbs Each Arm, Adjustable Dual Monitor Mount, Sturdy Steel vesa Monitor Mount with Stable VESA 75×75 100x100mm
Add a review
Related Products
Original price was: $59.99.$39.98Current price is: $39.98.
gr2 –
Very Nice Monitor Arm!
This monitor arm works great with my 24″ computer monitor. Assembly was very simple, just follow the instructions. I had no problems. I used the included C clamp and it is super sturdy. It also supports grommet base mounting. It has a VESA mount that works with most computer monitors up to 22 pounds. I like that you can dial in the position with ease. You adjust the tension on the gas spring mechanism to keep it nice and steady. Including raising, lowering, tilting, rotating, panning, etc. It has built in wire management capability. It is budget friendly. All things told, this is a great monitor arm and I would recommend it!
Booby D –
Awesome Buy!!!
This thing work amazingly!!! Super easy to install, its heavy duty and strong. Its an awesome deal for the money. It sets the monitors at the perfect height and position around your main screen. Im very happy with it! 2 mounting options, both work great.
Travis1210 –
Extremely good quality
So I purchased two of these after I purchased the first one and received it I mainly ordered a second.OK let’s get a few things out-of-the-way. There are a ton of monitor arms out there. What sets this one apart first off it actually works great. A lot of cheaper arms will not hold the weight they advertise. I love the fact that this has a built-in USB 3.0 connection. This is extremely handy for hooking up an external hard drive, or hooking up a dongle for a mouse or keyboard, or for just hooking up a flash drive, or even charging a phone. It is very well hidden underneath the side of the stand and once it is bolted and installed, N is extremely secure. Next to the bill quality of the arm is great. It has a nice set screws that allow you to set the tension of the swivels and to set the tension of the tilt and rotate function. The gas arm is adjustable for different weights of monitors, which I will speak about below. The cable routing mechanism is wonderful and definitely makes the install looks super clean. The attachment points are very secure and actually have adjustments so this could be used on a thin table as well as a very thick countertop style table. I’m using it on a almost 2 inch thick butcher block countertop, and I moved it down to the second mounting location and works absolutely great and fits wonderfully. It has nice feet on the bottom so that it doesn’t try to slide around and if you desire you can permanently install it by drilling a hole and using the supplied hardware to build it to your table.Now to the meat and potatoes of this on my two separate arms, I am running a 32 inch TV and a 32 inch gaming monitor. On the first arm is a Samsung 32 inch television it’s not super heavy, but was able to adjust the arm to work perfectly for that weight. On the second arm I am running a LG 32 inch gaming monitor Which is relatively heavy. It holds this weight no problem and is super secure. This monitor was quite expensive and I definitely wanted a good arm to keep it secure and I couldn’t be happier.The mount works extremely well especially on the gaming monitor. I am using an adapter on my 32 inch TV to bring it down to the standard 100 X 100 mount. It does push it out from the wall a little bit but not much and is perfectly acceptable, and works wonderfully.
YAAU –
Pretty good product
Assembly of the actual stand is easy, mounting to a monitor is not because of industrial design fluff. Gotta make the side you DON’T see look “sleek” and “smooth” and “organic” and “integrated” because…reasons. While this is on the manufacturer(s) of the monitor itself, what semi-modern monitor uses 100×100 VESA anyway?The included long screws are too long. Even using the plastic spacers they’ll bottom out with a 2mm gap; add washers and it’s a lever arm and not solid or confidence-inspiring. I used a die grinder to remove the excess material closer to 75×75 and used the included short screws, perfect. So either include 25mm screws instead of the 30mm (but then the spacers would be too long), or just update the mount plate to 75×75 only, and throw 100×100 “compatibility” into the dustbin of history where absolutely no one will miss it.Arm does move/adjust smoothly and is holding a 34″ widescreen where I left it 2 days ago, so it IS a great product once it’s properly fitted.
Houls –
Sturdy, Sleek & Surprisingly Easy to Install!
The ErGear Dual Monitor Arm completely upgraded my desk setup! I was a little intimidated at first, but installation was honestly fast and straightforward. The tool-free VESA mounts made attaching my two 27” monitors simple, and the instructions were clear and easy to follow.Once installed, the arms feel incredibly sturdy and secure. There’s no sagging, even with larger screens, and the adjustment range is fantastic. I can tilt, swivel, rotate, and adjust height effortlessly—perfect for switching between work mode and streaming mode. The cable management system keeps everything neat and clutter-free, which instantly made my workspace look cleaner and more professional.I also love how much desk space this freed up. It feels more organized and ergonomic, and I’ve already noticed less neck and shoulder strain.If you’re looking for an affordable, heavy-duty dual monitor mount that’s easy to install and fully adjustable, this is a fantastic choice. Highly recommend!
SKOSNAS –
Great monitor arm
Great price for a very adjustable monitor arm! I love I can move the monitor closer to me or further away and every other direction I want to move it. I know some reviewers said the monitor tilted forward, I would advise to keep in mind that at every point of articulation, there is a hex nut that can be tightened with the tool included in the box with minute arm. I adjusted mine twice and then tightened the hex nuts at the tilt point and connector point and have had no issues with the monitor dropping forward and not holing after a week of daily use and moving forward and backward. I use this arm for a 34” ultra wide curved monitor and it performs flawlessly.
B.melodie –
Parfait
Adrien dayde –
Très bon produit je recommence facile à installer
Ege –
This has been brilliant, does not look bad as many others would.
Duong quoc phong –
ich bin nit der Halterung sehr zufrieden.
Matthew –
Holds my monitor steady and firm, exactly what I wanted from it